[Dsg-rich] RICH status

[Marco Contalbrigo]

Hi Tyler,
tests are welcome but please keep attention to the
humidity level inside the RICH. The compressor flow
leakage brings humidity, in particular when not warmed
up by the electronics (with LV off).
Thanks, Marco.

On Tue, 8 May 2018, Tyler Lemon wrote:

> Hi Marco,
> 
> Before turning off the RICH compressor today, we want to perform a two tests:
> 
> First, we want to see whether the airflow can be made more steady by adjusting the
> air cooling panel's regulator while keeping the same flow level. This should
> isolate the airflow more from the compressor's on-off cycle.
> 
> The second test is to see the maximum airflow capable from one outlet of the air
> cooling panel. This would tell us more about the cooling capabilities we have for
> the existing system and whether we could potentially run the current system for two
> RICH sectors.
> 
> We will send the results of these tests when they are complete.
> 
> Best regards,
> Tyler
> 
> ___________________________________________________________________________________
> From: "Mirazita Marco" <Marco.Mirazita at lnf.infn.it>
> To: "dsg-rich" <dsg-rich at jlab.org>
> Sent: Monday, May 7, 2018 3:42:56 PM
> Subject: [Dsg-rich] RICH status
> 
> Hi all,
> I made today a new set of calibration runs, see
> https://logbooks.jlab.org/entry/3573975.
> The HV and LV are off.
> The compressor can now be turned off.
> Marco
> 
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich
> 
>