[Dsg-rich] Electronics panel temp and humidity

[Valery Kubarovsky]

But N2 sensors are updating normally. I can see it.
I can see it from your GUI.
I don't see any changes in EP volume.

________________________________
From: Tyler Lemon <tlemon at jlab.org>
Sent: Wednesday, April 1, 2020 16:06
To: Valery Kubarovsky <vpk at jlab.org>; Contalbrigo, Marco <mcontalb at fe.infn.it>; Marco, Mirazita <marco.mirazita at lnf.infn.it>; dsg-rich <dsg-rich at jlab.org>
Subject: Re: Electronics panel temp and humidity

Hi Valery,

I can see that the EP temperatures and humidity are indeed updating on EPICS but a very small amount (~ 0.001). These changes aren't seen on the GUI for the sensors because those indicators only go down to 0.01 deg C precision.

The N2 flow measurement is good as well, changes there are ~0.01 slm.

I also verified I could see these values changing in a live plot on MyaPlot.

Tyler
________________________________
From: Valery Kubarovsky <vpk at jlab.org>
Sent: Wednesday, April 1, 2020 3:54 PM
To: Tyler Lemon <tlemon at jlab.org>
Cc: Marco Contalbrigo <mcontalb at fe.infn.it>; Marco Mirazita <marco.mirazita at lnf.infn.it>
Subject: Electronics panel temp and humidity

Hi Tyler,
It looks for me that electronics panel temperature and humidity sensors are frozen.
Could you please take a look?
Hopefully, the nitrogen sensors are OK.
Thanks,
Valery

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20200401/a27edfbc/attachment-0002.html>