[Dsg-rich] Electronics panel temp and humidity

[Tyler Lemon]

Valery,

I can see value for the humidity sensors and temperature sensors in the EP change when I use "caget" from the command line.

The temperature sensors are changing very very little (~ 0.001 C) so you can't see that on the EP GUI because all of the indicators only go down to 0.01 precision.

There are some humidity sensors returning 0, but that has been that way for all of RICH's life when any electronics are on (LV is on now, according to RICH overview screen on EPICS). This is because electronics make it hotter, and the higher temperature, the lower the relative humidity in the environment.

Tyler

________________________________
From: Valery Kubarovsky <vpk at jlab.org>
Sent: Wednesday, April 1, 2020 4:09 PM
To: Tyler Lemon <tlemon at jlab.org>; Contalbrigo, Marco <mcontalb at fe.infn.it>; Marco, Mirazita <marco.mirazita at lnf.infn.it>; dsg-rich <dsg-rich at jlab.org>
Subject: Re: Electronics panel temp and humidity

But N2 sensors are updating normally. I can see it.
I can see it from your GUI.
I don't see any changes in EP volume.

________________________________
From: Tyler Lemon <tlemon at jlab.org>
Sent: Wednesday, April 1, 2020 16:06
To: Valery Kubarovsky <vpk at jlab.org>; Contalbrigo, Marco <mcontalb at fe.infn.it>; Marco, Mirazita <marco.mirazita at lnf.infn.it>; dsg-rich <dsg-rich at jlab.org>
Subject: Re: Electronics panel temp and humidity

Hi Valery,

I can see that the EP temperatures and humidity are indeed updating on EPICS but a very small amount (~ 0.001). These changes aren't seen on the GUI for the sensors because those indicators only go down to 0.01 deg C precision.

The N2 flow measurement is good as well, changes there are ~0.01 slm.

I also verified I could see these values changing in a live plot on MyaPlot.

Tyler
________________________________
From: Valery Kubarovsky <vpk at jlab.org>
Sent: Wednesday, April 1, 2020 3:54 PM
To: Tyler Lemon <tlemon at jlab.org>
Cc: Marco Contalbrigo <mcontalb at fe.infn.it>; Marco Mirazita <marco.mirazita at lnf.infn.it>
Subject: Electronics panel temp and humidity

Hi Tyler,
It looks for me that electronics panel temperature and humidity sensors are frozen.
Could you please take a look?
Hopefully, the nitrogen sensors are OK.
Thanks,
Valery

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20200401/81eedf25/attachment-0002.html>