[dsg-hallb_rich] [EXTERNAL] Re: Fw: request for quote

[Tomassini Sandro]

Hi Marc, 
The general tolerance should be better than +-0.1 mm. 
For the aluminum grade consider that Al6082 T6 is good or equivalent. 
Ciao
Sandro

⁣Inviato da BlueMail ​

Il giorno 12 nov 2021, 18:22, alle ore 18:22, Marc Mcmullen <mcmullen at jlab.org> ha scritto:
>Hi Marco,
>
>GandR needs to know the tolerance requirement and the grade of the
>aluminum.
>
>Regards,
>Marc
>
>________________________________
>From: eric at gandrmetals.com <eric at gandrmetals.com>
>Sent: Friday, November 12, 2021 10:05 AM
>To: joni at gandrmetals.com <joni at gandrmetals.com>; Marc Mcmullen
><mcmullen at jlab.org>; ryan at gandrmetals.com <ryan at gandrmetals.com>
>Subject: [EXTERNAL] Re: request for quote
>
>Marc,
>   Marc,
>I need to know the grade of aluminum you would like and the tolerances
>we need to hold.
>
>Thanks,
>
>Eric VanDusen
>
>Projects Manager/Estimator
>
>G&R Metals
>
>eric at gandrmetals.com<mailto:eric at gandrmetals.com>
>
>757-244-5693<tel:757-244-5693>
>
>810 Kiwanis St
>
>Hampton Va 23661
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>dsg-hallb_rich mailing list
>dsg-hallb_rich at jlab.org
>https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rich
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211112/a7b7fe90/attachment-0001.html>