[dsg-hallb_rich] request for quote

[Marc Mcmullen]

Thanks Sandro
________________________________
From: Tomassini Sandro <sandro.tomassini at lnf.infn.it>
Sent: Friday, November 12, 2021 1:43 PM
To: Marc Mcmullen <mcmullen at jlab.org>
Cc: dsg-hallb_rich at jlab.org <dsg-hallb_rich at jlab.org>
Subject: [EXTERNAL] Re: [dsg-hallb_rich] Fw: request for quote

Hi Marc,
The general tolerance should be better than +-0.1 mm.
For the aluminum grade consider that Al6082 T6 is good or equivalent.
Ciao
Sandro

Inviato da BlueMail<https://urldefense.proofpoint.com/v2/url?u=https-3A__bluemail.me&d=DwMFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=hQJSuIbzwxGOX7LZbVne0gHeC6U5hlDu99LTH_I02ZM&m=OUyoudXQpK7XZNAlL5lQfRH3SAV5ZfZuQWtrgeHUvDGhiJE-4dqGCImNUMEUrHFB&s=wXPC1ACZRRFEj4KozhXt79zXU0c8kPMFeQzITyAe7Ck&e=>
Il giorno 12 nov 2021, alle ore 18:22, Marc Mcmullen <mcmullen at jlab.org<mailto:mcmullen at jlab.org>> ha scritto:
Hi Marco,

GandR needs to know the tolerance requirement and the grade of the aluminum.

Regards,
Marc

________________________________
From: eric at gandrmetals.com <eric at gandrmetals.com>
Sent: Friday, November 12, 2021 10:05 AM
To: joni at gandrmetals.com <joni at gandrmetals.com>; Marc Mcmullen <mcmullen at jlab.org>; ryan at gandrmetals.com <ryan at gandrmetals.com>
Subject: [EXTERNAL] Re: request for quote

Marc,
   Marc,
   I need to know the grade of aluminum you would like and the tolerances we need to hold.

Thanks,

Eric VanDusen

Projects Manager/Estimator

G&R Metals

eric at gandrmetals.com<mailto:eric at gandrmetals.com>

757-244-5693<tel:757-244-5693>

810 Kiwanis St

Hampton Va 23661

________________________________

dsg-hallb_rich mailing list
dsg-hallb_rich at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rich
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211112/fdf1f137/attachment.html>