[dsg-hallb_rich] request for quote

[Marc Mcmullen]

Hi Sandro,

The tolerance given is too tight for GandR to provide a quote. They propose:

Standard for the peripheral and large penetrations would be +-.125''. Hole size and pattern +-.032''.

Will this work for your design? If so, I believe they will see if they can source the aluminum you specified. If they can source the materials, they will probably quote the project. So far we requested quotes from two companies, GandR is one of them, and the other shop declined to quote.

The Jlab machine shop estimate is $2000. I would like to get another quote just to gauge the Jlab estimate.





Regards,
Marc McMullen
Sr. Instrumentation Designer
Detector Support Group
(757) 269-7738

From: Tomassini Sandro<mailto:sandro.tomassini at lnf.infn.it>
Sent: Friday, November 12, 2021 1:43 PM
To: Marc Mcmullen<mailto:mcmullen at jlab.org>
Cc: dsg-hallb_rich at jlab.org<mailto:dsg-hallb_rich at jlab.org>
Subject: [EXTERNAL] Re: [dsg-hallb_rich] Fw: request for quote

Hi Marc,
The general tolerance should be better than +-0.1 mm.
For the aluminum grade consider that Al6082 T6 is good or equivalent.
Ciao
Sandro
Inviato da BlueMail<https://urldefense.proofpoint.com/v2/url?u=https-3A__bluemail.me&d=DwMFaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=hQJSuIbzwxGOX7LZbVne0gHeC6U5hlDu99LTH_I02ZM&m=OUyoudXQpK7XZNAlL5lQfRH3SAV5ZfZuQWtrgeHUvDGhiJE-4dqGCImNUMEUrHFB&s=wXPC1ACZRRFEj4KozhXt79zXU0c8kPMFeQzITyAe7Ck&e=>
Il giorno 12 nov 2021, alle ore 18:22, Marc Mcmullen <mcmullen at jlab.org<mailto:mcmullen at jlab.org>> ha scritto:
Hi Marco,

GandR needs to know the tolerance requirement and the grade of the aluminum.

Regards,
Marc


From: eric at gandrmetals.com <eric at gandrmetals.com>
Sent: Friday, November 12, 2021 10:05 AM
To: joni at gandrmetals.com <joni at gandrmetals.com>; Marc Mcmullen <mcmullen at jlab.org>; ryan at gandrmetals.com <ryan at gandrmetals.com>
Subject: [EXTERNAL] Re: request for quote

Marc,
   Marc,
   I need to know the grade of aluminum you would like and the tolerances we need to hold.

Thanks,

Eric VanDusen

Projects Manager/Estimator

G&R Metals

eric at gandrmetals.com<mailto:eric at gandrmetals.com>

757-244-5693<tel:757-244-5693>

810 Kiwanis St

Hampton Va 23661



dsg-hallb_rich mailing list
dsg-hallb_rich at jlab.org
https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rich

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211112/fe22acf5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 4C4BF73B7BEF478283B5724FEC9D4CCC.png
Type: image/png
Size: 144 bytes
Desc: 4C4BF73B7BEF478283B5724FEC9D4CCC.png
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211112/fe22acf5/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 7509A3B395314A8C8B576BE00A793FA8.png
Type: image/png
Size: 135 bytes
Desc: 7509A3B395314A8C8B576BE00A793FA8.png
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211112/fe22acf5/attachment-0003.png>