[dsg-hallb_rich] [EXTERNAL] patch panels for RICH module 2

[Chris Cuevas]

Dear Marco,

Please see the attached DC-LV interface board that mounts into the service support panel.

Thank you,
-Chris
~~~~~~~~~~~~
________________________________
From: Marco Mirazita <Marco.Mirazita at lnf.infn.it>
Sent: Monday, November 15, 2021 08:57
To: Chris Cuevas <cuevas at jlab.org>; Marc Mcmullen <mcmullen at jlab.org>
Cc: Valery Kubarovsky <vpk at jlab.org>; marco contalbrigo <mcontalb at fe.infn.it>; dsg-hallb_rich at jlab.org <dsg-hallb_rich at jlab.org>
Subject: Re: [EXTERNAL] patch panels for RICH module 2

Hello Chris,
we are in the process of asking a quotation for the RICH patch panels
and we want to be sure of the tolerance we can accept.
Do you have a number for the holes on the LV PCBs? I guess they are very
precise, much more than what we need to ask for the corresponding holes
on the panels.
Thank you,
Marco


Il 2021-11-05 09:57 Marco Mirazita ha scritto:
> Dear Chris and Tyler,
> I have uploaded in our wiki page the complete drawings of the RICH 1
> patch panels, see here:
> https://clasweb.jlab.org/wiki/index.php/RICH_Construction
> and scroll down to the section "Patch panels drawings and photos".
> I would ask you to check once again number and size of the holes for
> the connectors as soon as possible so that we can go on with the
> production.
> Please note that the HV and sensor connectors were mounted on separate
> smaller panels installed on the two main panels.
> Thank you,
> Marco
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211115/56dbcfe1/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CLAS_RICH_LV_PCB.pdf
Type: application/pdf
Size: 139619 bytes
Desc: CLAS_RICH_LV_PCB.pdf
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20211115/56dbcfe1/attachment-0001.pdf>