[dsg-hallb_rich] [EXTERNAL] Re: Panel orientation during aerogel installation?

[Tyler Lemon]

Hi Marco,

Okay, we'll plan for the same installation plan, then.

We'll get parts to set up a second storage tent since one completely assembled panel will need to be stored while the second one has aerogel installed on it.

-Tyler
________________________________
From: Marco Mirazita <Marco.Mirazita at lnf.infn.it>
Sent: Monday, April 11, 2022 10:04 AM
To: Tyler Lemon <tlemon at jlab.org>
Cc: dsg-hallb_rich at jlab.org <dsg-hallb_rich at jlab.org>
Subject: [EXTERNAL] Re: [dsg-hallb_rich] Panel orientation during aerogel installation?

Hi Tyler,
the aerogel was installed with the panels on the assembly carts, and
with plastic around the panels to protect the aerogel during the night,
since the assembly took few days.
But while the 3+3 cm aerogel was installed with the cart in its
transportation position, the 2 cm one was installed with the panel
rotated horizontally.
See a couple of picture attached.
Marco


Il 2022-04-11 15:42 Tyler Lemon ha scritto:
> Hi Marco Mirazita, Sandro, and Dario,
>
>  During the aerogel installation on to the panels, will the panels be
> horizontal or resting on the assembly carts?
>
>  Last time, the panels were on the assembly cart, but I remember you
> all mentioning that it may be better to install the aerogel while the
> panel is horizontal.
>
>  This would determine the dimensions of the tent that gets set up for
> the dry tent for the installation.
>
>  -Tyler
> _______________________________________________
> dsg-hallb_rich mailing list
> dsg-hallb_rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rich
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20220411/560961f0/attachment.html>