[dsg-hallb_rich] [EXTERNAL] Re: Panel orientation during aerogel installation?

[Marco Mirazita]

Hi Tyler,
the aerogel was installed with the panels on the assembly carts, and 
with plastic around the panels to protect the aerogel during the night, 
since the assembly took few days.
But while the 3+3 cm aerogel was installed with the cart in its 
transportation position, the 2 cm one was installed with the panel 
rotated horizontally.
See a couple of picture attached.
Marco


Il 2022-04-11 15:42 Tyler Lemon ha scritto:
> Hi Marco Mirazita, Sandro, and Dario,
> 
>  During the aerogel installation on to the panels, will the panels be
> horizontal or resting on the assembly carts?
> 
>  Last time, the panels were on the assembly cart, but I remember you
> all mentioning that it may be better to install the aerogel while the
> panel is horizontal.
> 
>  This would determine the dimensions of the tent that gets set up for
> the dry tent for the installation.
> 
>  -Tyler
> _______________________________________________
> dsg-hallb_rich mailing list
> dsg-hallb_rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rich
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20171213_202758.jpg
Type: image/jpeg
Size: 1906249 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20220411/835e3b32/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20171216_155419.jpg
Type: image/jpeg
Size: 1809365 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20220411/835e3b32/attachment-0003.jpg>