[dsg-hallb_rich] [EXTERNAL] Re: Questions/comments on items requested for RICH assembly

[Sandro Tomassini]

Hi Tyler,


the pitch for the M6 needed  is 1 mm.

We confirm we need 40 m of 1/4" thick by 1" wide foam strip.

Many thanks

Sandro




Il 24-Jan-22 15:13, Tyler Lemon ha scritto:
> Hi Dario, Sandro, and Marco,
>
> I talked to Dario this morning and I'm in the process of ordering the 
> M6 screws. What thread pitch is needed? McMaster-Carr has fine pitch 
> (0.75-mm) or course pitch (1-mm).
>
> For the foam, just confirming, we need 40 meters of 1/4" thick by 1" 
> wide foam strips?
>
> Last week, Marc ordered a kit for inserting helical threads that 
> includes an insertion tool that is expected to be delivered sometime 
> today.
>
> Thanks,
> Tyler
>
>
>
>
> _______________________________________________
> dsg-hallb_rich mailing list
> dsg-hallb_rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallb_rich

-- 
-----------------------------------------
Dr. Eng. Sandro Tomassini
Istituto Nazionale di Fisica Nucleare
Laboratori Nazionali di Frascati
---Research Division---
P.O.Box 13 00044 Frascati (RM) Italy
Tel. office: +39 06 9403 2919/8089
Fax: +39 06 94032256
e-mail:sandro.tomassini at lnf.infn.it
e-mail:sandro.tomassini at cern.ch
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.lnf.infn.it_&d=DwIDaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=Ry65GV1L9CI4W-wouYF1Yh0O9PuhLc4ZWUkBi_Op2h8&m=1UDPUQYGsSlv5ZVRRu2GHdE2WRdrBnydcuIYqrfo-Zlm-mdVKTC8vPt16EBzT9z3&s=3RHZV81hBJQS8qqONFKZ8oCkQ8qC05ghoxGQA4reYaE&e= 
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.cern.ch_&d=DwIDaQ&c=CJqEzB1piLOyyvZjb8YUQw&r=Ry65GV1L9CI4W-wouYF1Yh0O9PuhLc4ZWUkBi_Op2h8&m=1UDPUQYGsSlv5ZVRRu2GHdE2WRdrBnydcuIYqrfo-Zlm-mdVKTC8vPt16EBzT9z3&s=1bHD2MHQx3yGgnvJXgvGodfEPzwfW5vKg70jooM62nQ&e= 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20220124/48ae5f83/attachment.html>