[dsg-hallb_svt] CVT work

[Yuri Gotra]

Thank you Brian,


I started R1. The main requirement is for the BMT to slide over the 
cables, we don't have much clearance so the cable bundles should be 
routed w/o crossing each other whenever possible. Tape and velcro will 
do too, I put a box of velcro in the cart.

For R1M10 on the HV patch panel, would it be possible to replace the 
connector by removing the 4 screws attaching it to the panel?

On 4/9/21 11:21 AM, Brian Eng wrote:
> Yes, I'll be in tonight to start work on connecting cables on the 
> detector side.
>
> Two quick questions.
> 1) How neatly do these need to be run, i.e. can I just use velcro/tape 
> to secure cables or should it be properly cable wrapped/routed?
> 2) Has anything been decided on the damaged HV patch panel connector?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20210409/7e150cf7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: gotra.vcf
Type: text/x-vcard
Size: 102 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_svt/attachments/20210409/7e150cf7/attachment-0001.vcf>