[Dsg-hallc_controls] Dipole Field Regulation PLC code completed

[Steve Lassiter]

One can look at the following epics variable for the HMS NMR reading. 

ecDI_B_True_NMR 

The field appears to be locked in now. 

Steven 

----- Original Message -----

From: "Brian Eng" <beng at jlab.org> 
To: "Mike Fowler" <fowler at jlab.org> 
Cc: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
Sent: Wednesday, September 26, 2018 3:39:03 PM 
Subject: Re: [Dsg-hallc_controls] Dipole Field Regulation PLC code completed 

Short of connecting to that PLC, no. 

Should I also be writing to the controller tag Steve created on the HMS PLC as well? 

Since we don't have access to the HMI screens I don't know what the field the PT2025 is reporting (EPICS only has the dipole current), but currently the PT2026 has 1.4442039 T with the last 2 digits bouncing around, but it's staying pretty close to 40 (low of 36, high of 46 for the short time I was watching the tag). 

----- Original Message ----- 
> From: "Mike Fowler" <fowler at jlab.org> 
> To: "dsg-hallc controls" <dsg-hallc_controls at jlab.org> 
> Sent: Wednesday, September 26, 2018 2:55:38 PM 
> Subject: Re: [Dsg-hallc_controls] Dipole Field Regulation PLC code completed 

> On 9/26/2018 11:07 AM, Brian Eng wrote: 
>> the NMR is currently locked and sending field values 
> 
> Any way we can see the values? 
> 
> Mike 
_______________________________________________ 
Dsg-hallc_controls mailing list 
Dsg-hallc_controls at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-hallc_controls 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_controls/attachments/20180926/3d17b949/attachment.html>