[Dsg-hallc_nps] [EXTERNAL] Re: Radiall connector

[Greg Kibilko]

Hi Aaron, Brian and all,

Happy New Year to you too!  Another year, another problem with Radiall 
pieces?!? :-(

There is clearly a difference between the two pieces.  I'll talk to 
Gianni and the CAEN HV people tomorrow morning when they're back in the 
office.  I suppose it could be QAQC or incorrect screws, but whatever 
the issue we need to get it resolved.

How many pieces are we talking about?  Is it the whole last order?

Best,
Greg

On 1/7/2021 4:19 PM, Brian Eng wrote:
> That was going to be my guess as well. From the top down picture it 
> looks like the threaded portion on the new ones have a slightly bigger 
> diameter compared to the old ones.
>
> ------------------------------------------------------------------------
> *From:* Dsg-hallc_nps <dsg-hallc_nps-bounces at jlab.org> on behalf of 
> Aaron Brown <ambrown at jlab.org>
> *Sent:* Thursday, January 7, 2021 3:50 PM
> *To:* Mindy Leffel <leffel at jlab.org>; dsg-hallc_nps at jlab.org 
> <dsg-hallc_nps at jlab.org>; Greg Kibilko <greg at setechsales.com>
> *Subject:* Re: [Dsg-hallc_nps] Radiall connector
> Mindy, I've looped in Greg.
>
> Hi Greg,
> First, Happy New Year!
> Please see below the email from Mindy (and attachments) regarding the 
> strain relief for the Radiall 52-pin connectors.
> I wonder if it's possible that the connectors were shipped with the 
> wrong screws?
> That's really the only reason I can think of for this situation.
> If anyone else has any ideas...
>
> -- Aaron
> ------------------------------------------------------------------------
> *From:* Dsg-hallc_nps <dsg-hallc_nps-bounces at jlab.org> on behalf of 
> Mindy Leffel <leffel at jlab.org>
> *Sent:* Thursday, January 7, 2021 3:42 PM
> *To:* dsg-hallc_nps at jlab.org <dsg-hallc_nps at jlab.org>
> *Subject:* [Dsg-hallc_nps] Radiall connector
> I have a new issue with the Radiall connectors. The last five 
> connectors I tried to attach have strain relief screws that won't 
> tighten. I tried one from a previous order, it tightened properly. The 
> first picture shows the strain relief attached to a connector. The 
> second picture is a top view of the strain relief. They look like 
> they're made of different materials, the old ones are shinier. The 
> last picture is a side by side view, the screw holes look like the 
> depths are different.
>
> The screws are slightly loose in the holes, even before I try to 
> attach them to the connector. Poor quality control?

-- 
*Greg Kibilko*
*SETS - SE Technical Sales, Inc.*
112 Tyra Lane
Townville, SC 29689
P: (864) 356-2606
CAEN Products <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.caen.it_csite&d=DwID-g&c=CJqEzB1piLOyyvZjb8YUQw&r=xEtW9c3YOrPzCwZnOoNyx92mohSWEih9F9MUxcjXPos&m=vsw8Vn-nlkLq_G49RYXj9rfeZs_W8CQg_j8_9Pc8jHc&s=0-O-5EkD83jtMX396dHdExmhBivc3tcySJ9nq8hX6RE&e= >
CAEN SyS Products & Solutions <https://urldefense.proofpoint.com/v2/url?u=https-3A__caensys.com_products-2Dand-2Dsolutions_&d=DwID-g&c=CJqEzB1piLOyyvZjb8YUQw&r=xEtW9c3YOrPzCwZnOoNyx92mohSWEih9F9MUxcjXPos&m=vsw8Vn-nlkLq_G49RYXj9rfeZs_W8CQg_j8_9Pc8jHc&s=I2RvkuZWJbWrosP_T-ERc8OfhR-USRK5qUSNXQjCYZA&e= >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20210107/6113e30a/attachment-0001.html>