[Dsg-hallc_nps] [EXTERNAL] NPS priorities for next couple weeks

[Brian Eng]

As a temporary workaround so USB isn't needed I've installed the iseg software on cdaql3 in the following location, so we can at least control the MPOD modules remotely.

/home/cdsg/isegSnmpControl/isegSnmpControl



I also moved the nps-vme5 controller from the VME crate in EEL/108 to Aaron's test setup in EEL/121C. It boots fine, but since I don't know the login we can't really use it for any development.

________________________________
From: Dsg-hallc_nps <dsg-hallc_nps-bounces at jlab.org<mailto:dsg-hallc_nps-bounces at jlab.org>> on behalf of Brad Sawatzky <brads at jlab.org<mailto:brads at jlab.org>>
Sent: Monday, August 1, 2022 4:46 PM
To: dsg-hallc_nps at jlab.org<mailto:dsg-hallc_nps at jlab.org> <dsg-hallc_nps at jlab.org<mailto:dsg-hallc_nps at jlab.org>>
Subject: [Dsg-hallc_nps] [EXTERNAL] NPS priorities for next couple weeks

    nps-lv1
  That crate is also online.  I have been controlling it through a USB
  cable, which is not great.  It will be great to have the production
  software for that MPOD crate up and running so we can control the
  crate from cdaql3
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20220810/b301336f/attachment.html>