[Dsg-hallc_nps] Wiener LV control software?

[Stephen Wood]

If it is MPOD, the “Easy LV HV” software from Wiener should work.  That software is being used for an MPOD crate in the EEL.

EPICS should not be too hard either.  I don’t know how different LV is from HV, but there is an MPOD crate controlled with EPICS in SBS.

Steve

> On Jul 14, 2022, at 1:08 PM, Brad Sawatzky <brads at jlab.org> wrote:
> 
> Thanks Bryan, the iSeg software looks like what I need. I'll try it out
> and bug you if I run into any major issues.
> 
> -- Brad
> 
> On Thu, 14 Jul 2022, Brian Eng wrote:
> 
>> Hi Brad,
>> Depending on what you need to do there are two completely different suites
>> of software you can use.
>> The one from Wiener: MUSEControl (I've only used this via USB) that has
>> access to all the parameters of the LV
>> modules. https://file.wiener-d.com/software/MUSEcontrol/
>> The one from iseg: isegControl2 (I've only used this via network; it uses
>> SNMP to communicate) that has some of the LV parameters (at least voltage,
>> current, on/off) but not
>> everything. https://iseg-hv.com/download/?dir=SOFTWARE/isegControl2
>> I think for what you're trying to do the latter program is the better
>> choice, as for sure it works in Linux (I suspect that's what cdaql3 is
>> running based on the hostname). I think the former is Windows only?
>> There's a manual for the iseg software at that link as well, let me know if
>> there's any questions/issues.
>> 
>> ----------------------------------------------------------------------------
>> 
> 
>> From: Dsg-hallc_nps <dsg-hallc_nps-bounces at jlab.org> on behalf of Brad
>> Sawatzky <brads at jlab.org>
>> Sent: Thursday, July 14, 2022 12:20 PM
>> To: dsg-hallc_nps at jlab.org <dsg-hallc_nps at jlab.org>
>> Subject: [Dsg-hallc_nps] [EXTERNAL] Wiener LV control software?
>> 
>> Hi guys,
>> 
>> Do you have the Wiener 'MPOD' low voltage control software installed on
>> cdaql3? If so, can you email me some instructions on how to run it.
>> 
>> (There is no need for it to be perfect at this time. I just need some
>> way to set voltages on that crate to begin PMT tests in EEL/108.)
>> 
>> -- Brad
>> 
> -- 
> Brad Sawatzky (he/him), PhD <brads at jlab.org <mailto:brads at jlab.org>> -<>- Jefferson Lab/ Hall C/C111
> Ph: 757-269-5947 -<>- Fax: 757-269-5235 -<>- Pager: brads-page at jlab.org <mailto:brads-page at jlab.org>
> The most exciting phrase to hear in science, the one that heralds new
> discoveries, is not "Eureka!" but "That's funny..." -- Isaac Asimov
> _______________________________________________
> Dsg-hallc_nps mailing list
> Dsg-hallc_nps at jlab.org <mailto:Dsg-hallc_nps at jlab.org>
> https://mailman.jlab.org/mailman/listinfo/dsg-hallc_nps <https://mailman.jlab.org/mailman/listinfo/dsg-hallc_nps>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallc_nps/attachments/20220714/a97b5b5a/attachment.html>