[Dsg-hallc_nps] Wiener LV control software?

[Brad Sawatzky]

Thanks Bryan, the iSeg software looks like what I need.  I'll try it out
and bug you if I run into any major issues.

-- Brad

On Thu, 14 Jul 2022, Brian Eng wrote:

> Hi Brad,
> Depending on what you need to do there are two completely different suites
> of software you can use.
> The one from Wiener: MUSEControl (I've only used this via USB) that has
> access to all the parameters of the LV
> modules. https://file.wiener-d.com/software/MUSEcontrol/
> The one from iseg: isegControl2 (I've only used this via network; it uses
> SNMP to communicate) that has some of the LV parameters (at least voltage,
> current, on/off) but not
> everything. https://iseg-hv.com/download/?dir=SOFTWARE/isegControl2
> I think for what you're trying to do the latter program is the better
> choice, as for sure it works in Linux (I suspect that's what cdaql3 is
> running based on the hostname). I think the former is Windows only?
> There's a manual for the iseg software at that link as well, let me know if
> there's any questions/issues.
> 
> ----------------------------------------------------------------------------
> 

> From: Dsg-hallc_nps <dsg-hallc_nps-bounces at jlab.org> on behalf of Brad
> Sawatzky <brads at jlab.org>
> Sent: Thursday, July 14, 2022 12:20 PM
> To: dsg-hallc_nps at jlab.org <dsg-hallc_nps at jlab.org>
> Subject: [Dsg-hallc_nps] [EXTERNAL] Wiener LV control software?
> 
> Hi guys,
> 
> Do you have the Wiener 'MPOD' low voltage control software installed on
> cdaql3?  If so, can you email me some instructions on how to run it.
> 
> (There  is no need for it to be perfect at this time.  I just need some
> way to set voltages on that crate to begin PMT tests in EEL/108.)
> 
> -- Brad
> 
-- 
Brad Sawatzky (he/him), PhD <brads at jlab.org> -<>- Jefferson Lab/ Hall C/C111
Ph: 757-269-5947  -<>-  Fax: 757-269-5235  -<>- Pager: brads-page at jlab.org
The most exciting phrase to hear in science, the one that heralds new
  discoveries, is not "Eureka!" but "That's funny..."   -- Isaac Asimov