[Dsg-hallc_nps] [EXTERNAL] Re: LV GUI

[Stephen Wood]

The only MPOD EPICS GUI that I know about is the Phoebus HV GUI used in Halls A and C.  It is not specific to Mpod.

Steve

> On Oct 20, 2022, at 11:57 AM, Brad Sawatzky via Dsg-hallc_nps <dsg-hallc_nps at jlab.org> wrote:
> 
> Hi Aaron,
> 
> The most critical thing is PV support for at least the V_meas and I_meas
> values for an alarm handler.
> 
> I had understood that there was a pre-existing MPOD GUI on-site that
> could be easily adapted.  If not, I would put that at the bottom of the
> to-do list.  As long as we have a working alarm handler, we can
> get away with a combination of the MPOD Web interface and the iSeg
> software for visual monitoring and controls.
> 
> -- Brad
> 
> On Thu, 20 Oct 2022, Aaron Brown wrote:
> 
>> Hi Brad,
>> What LV parameters need to be on the GUI (other than set voltage and
>> readback voltage).
>> Thanks,
>> Aaron
> 
> -- 
> Brad Sawatzky (he/him), PhD <brads at jlab.org> -<>- Jefferson Lab/SciComp/F272
> Ph: 757-269-5947  -<>-  Fax: 757-269-5235  -<>- Pager: brads-page at jlab.org
> The most exciting phrase to hear in science, the one that heralds new
>  discoveries, is not "Eureka!" but "That's funny..."   -- Isaac Asimov
> _______________________________________________
> Dsg-hallc_nps mailing list
> Dsg-hallc_nps at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-hallc_nps