[Dsg-halld_plc] [Dsg-internal] PXI Power Supply

[Tyler Lemon]

Hi Brian, 

Pablo and I talked to the people in the stock room and they do not have any free-stock power supplies to test the PXI chassis. They said they just got rid of a bunch of stuff after the property inventory. 

Best regards, 
Tyler 



From: "Brian Eng" <beng at jlab.org> 
To: "dsg-internal" <dsg-internal at jlab.org> 
Sent: Tuesday, February 27, 2018 4:35:28 PM 
Subject: [Dsg-internal] PXI Power Supply 

Tyler/Pablo, 

Since the power supply in the VME crate I have that probably fits only has 20A on the +12V line I don't see the point in swapping it. 

Can you guys check with Don over in the stock room tomorrow to see if they have a supply that will work (needs the same or higher numbers for the currents) in free stock? If they don't power supplies, maybe they have computers you guys could pull one from? 

Attached is a picture of the ratings on the PXI supply. 


The dimensions of it are 150 x 86 x 140 mm (w x h x d) it's the depth of 140mm that we've been running into issues with since most of the supplies we have are deeper than that. 

I don't know that the power supply is actually bad, but better to try stuff while we wait on NI to reply than do nothing. 

_______________________________________________ 
Dsg-internal mailing list 
Dsg-internal at jlab.org 
https://mailman.jlab.org/mailman/listinfo/dsg-internal 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-halld_magnets/attachments/20180228/79f0232b/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20180227_162322.jpg
Type: image/jpeg
Size: 227709 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-halld_magnets/attachments/20180228/79f0232b/attachment-0002.jpg>