[Halld-cal] BCAL beam test Executive Summary

[Elton Smith]

Hi Zisis,

Sorry, I initially only looked at your abstract and not at the entire 
executive summary.

 From the summary, I have a more fundamental question regarding the 
orientation of the module relative to the tagger/electron beam.  First 
we are confused as to why the footprint along the beam is so large. You 
mention that the angle adjustment is 0-50 deg. We assume that 0 deg 
corresponds to the module positioned perpendicular to the electron 
plane, but some of the description does not match this assumption.  It 
may be useful to send a sketch with some dimensions and angles indicate, 
or you can call my office and we can work though the questions.

Thanks, Elton.

On 2/8/12 8:38 AM, Elton Smith wrote:
> Hi Zisis,
>
> The summary sounds good. I would mention two additional things: 1) 
> that the prototype is every way identical to the BCAL modules except 
> for the length. 2) operation in Hall B will be parasitic with the 
> ongoing experiment.
>
> Cheers, Elton.
>
> Elton Smith
> Jefferson Lab MS 12H5
> 12000 Jefferson Ave
> Suite #16
> Newport News, VA 23606
> (757) 269-7625
> (757) 269-6331 fax
>
>
> On 2/8/12 12:51 AM, Zisis Papandreou wrote:
>> Hi Eugene et al:
>>
>> I uploaded the Executive Summary to DocDB: 
>> http://argus.phys.uregina.ca/cgi-bin/private/DocDB/ShowDocument?docid=1900
>> It is also attached below.
>>
>> Please let me know if you want anything adjusted; if all looks ok, 
>> please present to Volker.  I should have the full proposal ready by 
>> Thursday.
>>
>> Cheers, Zisis...
>> ---
>> Prof. Zisis Papandreou, Ph.D., P.Phys.
>> Department of Physics   |  tel.:     (306) 585-5379
>> University of Regina        |  fax.:     (306) 585-5659
>> Regina, SK  S4S 0A2        |  email:  zisis at uregina.ca
>> Web:  http://web.me.com/zisis/professional/
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Halld-cal mailing list
>> Halld-cal at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/halld-cal