[Halld-offline] New version set: version_4.24.0.xml

[Mark Ito]

Folks,

I forgot one detail about the new tag of HDGeant4 in this version set. 
You will need to install the libtirpc-devel RPM on your machines to do 
the build. This has already been done on the farm, ifarms, and jlabl3, 
jlabl4, and jlabl5 at the Lab.

There are also new Docker and Singularity containers with the addition 
of this RPM. The Singularity container is

   https://halldweb.jlab.org/dist/gluex_centos7.7-2.simg

and the Docker container is

https://hub.docker.com/repository/docker/markito3/gluex_docker_devel

Note the "prod" version of the Docker container remains unchanged, i.e., 
it does not have the new RPM. This is out of an abundance of caution. 
The prod version is the one used on the OSG and at NERSC (I think). This 
should be OK, since libtirpc-devel is only necessary to build the latest 
HDGeant4, not to run it.

   -- Mark

On 8/5/20 2:37 PM, Mark Ito wrote:
>
> Folks,
>
> A new version set, version_4.24.0.xml 
> <https://halldweb.jlab.org/halld_versions/version_4.24.0.xml> is ready 
> to go. It has updates to the following packages:
>
> hdds 4.10.0 <https://github.com/JeffersonLab/hdds/releases/tag/4.10.0>
>
>   * Update release.
>   * Builds on a Python-3-default system
>   * Differences from 4.9.0
>     <https://github.com/JeffersonLab/hdds/compare/4.9.0...4.10.0>
>
> halld_recon 4.19.0 
> <https://github.com/JeffersonLab/halld_recon/releases/tag/4.19.0>
>
>   * Update release.
>   * Writing of CCAL to hddm from @somovalex <https://github.com/somovalex>
>   * Allow building on a Python-3-default system from @markito3
>     <https://github.com/markito3>
>   * This release was tagged from the revert_fcal_pull_request branch
>     to avoid problematic issues with the current master.
>   * Differences from 4.18.1
>     <https://github.com/JeffersonLab/halld_recon/compare/4.18.1...4.19.0>
>
> halld_sim 4.20.0 
> <https://github.com/JeffersonLab/halld_sim/releases/tag/4.20.0>
>
>   * Update release
>   * Exclude bad FCAL channels for PrimEx runs, from @somovalex
>     <https://github.com/somovalex> .
>   * Mods to build under Python 3, from @markito3
>     <https://github.com/markito3> .
>   * Addition of omegapi_amplitude, from @amfodajlab
>     <https://github.com/amfodajlab> .
>   * Differences from 4.19.0
>     <https://github.com/jeffersonlab/halld_sim/compare/4.19.0...4.20.0>.
>
> hdgeant4 2.16.0 
> <https://github.com/JeffersonLab/HDGeant4/releases/tag/2.16.0>
>
>   * Update release
>   * Changes to patches to Geant4 for particle propagation in magnetic
>     fields, from @rjones30 <https://github.com/rjones30> .
>   * Changes to photon beam generation, including new importance
>     sampling scheme, from @rjones30 <https://github.com/rjones30> .
>   * Added ability to build against Python 3, from @markito3
>     <https://github.com/markito3> .
>   * Differences from 2.15.0
>     <https://github.com/JeffersonLab/hdgeant4/compare/2.15.0...2.16.0>
>
> This version set will become the default at JLab at midnight tonight.
>
>   -- Mark
>
>
>
> _______________________________________________
> Halld-offline mailing list
> Halld-offline at jlab.org
> https://mailman.jlab.org/mailman/listinfo/halld-offline
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/halld-offline/attachments/20200805/622766aa/attachment.html>