[Pansophy] FW: Closing travelers

[John Vennekate]

Dear Valerie et al.

Would it be possible to add a final step i.e. hold point to the L2HE-VTA-CAV-VTRF traveler that reads "Fill out the cavity performance traveler and contact PI" without going through the entire revision process? (As this is not really a technical change...)


This is a bit like an additional guard rail at the cliff no one ever fell off, we never had issues with this as all (most) operators would never just go ahead and close travelers, but apparently this is necessary now...

Cheers,
John V


From: Mircea Stirbet <stirbet at jlab.org>
Sent: Tuesday, October 11, 2022 09:55
To: John Vennekate <hannesv at jlab.org>
Cc: Kirk Davis <kdavis at jlab.org>; Mircea Stirbet <stirbet at jlab.org>
Subject: Re: Closing travelers

Good morning John,

Filling up the travelers, I do not double check what is written in VTA Procedures.... sure, my mistake and I have to apologize once more. The L2HE-VTA-CAV-VTRF traveler do not mention anywhere  to contact the PI with the results. In particular,  pct 16 specifies:

[cid:ba392876-fd14-4865-b6bb-1caa7d45caab]

It will be great to have this PI  requirement included also in the traveler ( not only in the Procedure ) and eventually you may want to consider, in a revised version of this traveler to insert a Hold Point ( as the last step in your traveler ?).  It is a pretty convenient tool.  See attached docx file as a sample.

For your convenience, see also Allen's Traveler Authorship Training file attached to this email. It will help you to add the last version of Pansophy traveler template to the Office Word.

Take care,
Mircea





________________________________
From: John Vennekate <hannesv at jlab.org<mailto:hannesv at jlab.org>>
Sent: Monday, October 10, 2022 16:50
To: Mircea Stirbet <stirbet at jlab.org<mailto:stirbet at jlab.org>>
Cc: Kirk Davis <kdavis at jlab.org<mailto:kdavis at jlab.org>>
Subject: Closing travelers


Hey Mircea,



Pre-apologies if that wasn't clear from the procedure - but could you please refrain from closing travelers for HE-cavities right after you finished them.
We've sort of established the procedure to double check by the PI (or someone else) before we finalize everything.



The procedure actually mentions to:
[cid:image001.png at 01D8DCC8.28914A90]



Which might be a bit ambiguous, again apologies for that.



Cheers,

John V
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20221012/d07e3d05/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 8717 bytes
Desc: image001.png
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20221012/d07e3d05/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 104784 bytes
Desc: image.png
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20221012/d07e3d05/attachment-0003.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Mircea L2HE VTA traveler Hold Point.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 201857 bytes
Desc: Mircea L2HE VTA traveler Hold Point.docx
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20221012/d07e3d05/attachment-0001.docx>