[Pansophy] Final Disposition: NCR:623 on SNSPPU-CMA-SEC-INSP-R3--9

[Gary Cheng]

Sorry, I closed the wrong NCR. Please re-open this one.

Gary

On 3/28/2023 3:41 PM, CHENG at JLAB.ORG wrote:
>
> An Engineer has responded to the reworked/remeasured Non-Conformance 
> Report - sequence number 623 for traveler SNSPPU-CMA-SEC-INSP-R3--9.
>
> *THIS NCR HAS BEEN AUTOMATICALLY CLOSED BASED ON DISPOSITION*
> *PAGE 4: FINAL DISPOSITION*
> Response Engr: 	CHENG
> Response Date: 	28-Mar-2023
> Disposition: 	Conforming
> Disposition Comment: 	Communicated with CMA group lead, the missing 
> shields have been found
> *PAGE 3: MODIFICATION/RE-MEASURE*
> Rework Staff: 	
>
>
>
>
> Rework Date: 	
>
>
>
>
> Rework Comment: 	
>
>
>
>
> Verify Staff: 	
>
>
>
>
> Verify Date: 	
>
>
>
>
> Verify Comment: 	
>
>
>
>
> *ENGINEER RESPONSE*
> Response Engr: 	
>
>
>
>
> Response Date: 	
>
>
>
>
> Disposition: 	Hold/Re-measure
> Disposition Comment: 	
>
>
>
>
> *PAGE 2: FIRST DISPOSITION*
> Response Engr: 	CHENG
> Response Date: 	11-Nov-2022
> Disposition: 	Hold/Re-measure
> Disposition Comment: 	At this stage, it's not sure if rectification is 
> needed immediately. The plan is to try and install SEC 06 onto CM07, 
> loosen the hardware at both ends of the elbow/bellows and see how well 
> it corrects. There is a possibility that the elbow needs to be cut 
> open and rotated, if determined necessary
> *PAGE 1: INITIATE AND DESCRIBE*
> SN: 	006
> SNtype: 	SECSN
> DRAWING NUM: 	104210600-M8U-8200-A001
> PART DESCRIPTION: 	SUPPLY END CAN ASSY
> TRAV_ID: 	SNSPPU-CMA-SEC-INSP
> TRAV_REV: 	R3
> TRAV_SEQ_NUM: 	9
> DESCRIBE STAFF: 	CHENG
> DESCRIBE DATE: 	2022-11-11 08:21:00.0
> DESCRIBE COMMENT: 	Refer to the phase 1 and phase 2 measurements. 
> There are multiple nonconformances, like seen on other SEC's. The most 
> worrisome deviation is on the bridge tube angle, i.e. 4.8 degree 
> out-of-tolerance, 5.3 degrees total deviation.
> NOTIFICATION COMMENT: 	
>
> The NCR is at the following URL: 623 
> <https://pansophy.jlab.org/pansophy/Travelers/TRAVELER_FORM.cfm?project=SNSPPU&area=SNSPPU&system=CMA&TRAV_ID=SNSPPU-NCR&TRAV_REVISION=R12&page=4&maxpage=4&TRAV_SEQ_NUM=623&travstat=y&serialnum=006&SN=006&SNTYPE=SECSN> 
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20230328/b59168d3/attachment-0001.html>