[Pansophy] SNSPPU-CMA-CMASS-ASSY-R3 References

[Gary Cheng]

Allen,

I haven't been able to work on this traveler yet but I will try to find 
time working on it.

Thanks,
Gary

On 10/10/2023 11:04 AM, Allen Samuels wrote:
>
> Gary,
>
> It’s been a while on this traveler, have you had a chance to look at 
> these references?
>
> *From:* Pansophy <pansophy-bounces at mailman.jlab.org> *On Behalf Of 
> *Allen Samuels via Pansophy
> *Sent:* Monday, September 18, 2023 1:43 PM
> *To:* Gary Cheng <cheng at jlab.org>
> *Cc:* SRF Pansophy (pansophy at jlab.org) <pansophy at jlab.org>
> *Subject:* [Pansophy] SNSPPU-CMA-CMASS-ASSY-R3 References
>
> Gary,
>
> I was looking over your SNSPPU-CMA-CMASS-ASSY traveler before routing. 
> Part of that involved updating the drawing links to ones to the jlab 
> document control group area, which is the preferred method for 
> drawings now. I also looked at the procedure links, and had some 
> things I wanted to bring up. The CP-SNSPPU-CM-INST-MLI procedure goes 
> to a C75 procedure, and does not appear to have been approved. The 
> Indium Installation Procedure didn’t have any project assigned to it, 
> but I did find this version 
> <https://jlabdoc.jlab.org/docushare/dsweb/Get/Document-257359/SRF-MSPR-CMA-THERM-IND-R1.pdf> 
> in the SRF Master Procedure area, and wanted to be sure it was 
> acceptable before I changed it. Could you confirm if the linked Indium 
> procedure version is acceptable, and let me know if there is an 
> acceptable alternative to the CP-SNSPPU-CM-INST-MLI procedure? If it 
> is something that will be used in multiple projects, it could be 
> turned into a master procedure.
>
> Allen
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/pansophy/attachments/20231010/1536c364/attachment-0001.html>