[PEPPo] PEPPo design drawings

[Joe Grames]

Dear PEPPo Collaborator -

The as-built PEPPo engineering drawings (assembly and sub-component) in 
PDF format are now available from our group folder 
(/M:\positron\peppo\installation\jlab_drawings/).  Note, the "M:\" 
windows path is equivalent to the "/group/positron/" unix path.

These drawings represent the collection of JLAB designed (new or 
modified) parts, which constitute the vacuum components, support 
structures and non-polarimeter detectors and diagnostics.  Each drawing 
file name identifies the document controlled drawing number and part 
description.

If you don't find a drawing you are looking for then it is likely:

    - an E166 magnet; these are documented either in the E166 drawing
    folder (/M:\positron\peppo\installation\e166_drawings/),
    publications or private communications

    - Compton polarimeter; Eric is working with Jean-Francois to
    populate the LPSC drawing folder
    (/M:\positron\peppo\installation\lpsc_drawings/)

    - previously designed JLAB component; these are items that were
    previously designed and re-used for PEPPo, e.g., the quadrupole
    "MQD" magnets, where the drawing package is available, but if needed

    - overlooked component; make a request and we'll look for additional
    drawings, add to the folder

Useful beam line layout drawings and survey transmittals are being 
written now and will be available soon.

This should be enough to keep all the modelling designers busy!!!

Best,
Joe

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/peppo/attachments/20111128/6fad2b0c/attachment.html