[Dsg-rich] RICH part drawings to check before fabrication

[Robert Miller]

Hi Tyler,

You can paint all the parts regular yellow to reduce the cost.

Regards,
Bob

Sent from my iPhone

> On Aug 22, 2017, at 1:59 PM, Tyler Lemon <tlemon at jlab.org> wrote:
> 
> Hello Bob,
> 
> In regards to General Comment #1 you made in the attached document, we were told by G&R Metals that safety yellow is more expensive compared to regular yellow because safety yellow is defined by ANSI Z535 standard.
> 
> Marc has contacted G&R for an estimate on how much more the job will cost if safety yellow is used. The price difference is in the table below. 
> 
> White (Current Quote)	White (Currently quoted)
> Yellow (If Specified on drawings)
> Safety Yellow (If Specified on drawings)
> Load Test Parts
> $1840
> $2020
> $2400
> Trolley
> $2375
> $2550
> $3000
> Strongback parts
> $1490
> $1843
> $2400
> 
> Because of the price difference, could you let us know which parts, if any, can be painted with regular yellow or plain white?
> 
> Best regards,
> Tyler
> 
> 
> From: "Bob Miller" <rmiller at jlab.org>
> To: "Dario Orecchini" <dario.orecchini at googlemail.com>, "Tomassini Sandro" <sandro.tomassini at lnf.infn.it>
> Cc: "Tyler Lemon" <tlemon at jlab.org>
> Sent: Thursday, August 17, 2017 3:01:28 PM
> Subject: Re: RICH part drawings to check before fabrication
> 
> Hi Dario and Sandro,
> 
> Please see my comments in the attached document for the RICH tooling drawings.
> 
> Regards,
> 
> Bob
> 
> On 8/16/2017 3:58 PM, Tyler Lemon wrote:
> Hello Bob,
> 
> As we discussed on the phone, attached are the three drawings sets for the RICH parts that DSG would like checked by Hall B Engineering.
> 
> It would be urgent to check these as soon as possible to avoid any delay in the parts' fabrication. We expect that the procurement of the fabrication contract will be complete in about one week.
> 
> Best regards,
> Tyler
> 
> -- 
> Bob Miller
> Hall B Lead Engineer
> Jefferson Lab
> 757 269-7867
> 
> 
> <RICH Drawing Review.docx>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170822/1d50c17c/attachment-0002.html>