[Dsg-rich] RICH part drawings to check before fabrication

[Patrizia Rossi]

Dario,

as you know we are working on a very limited budget thus I think it is unnecessary to spend additional money for something not mandatory.
I have already signed the PRs for the while color and I would like to stay with that.


patrizia
---------------------------------------------------
# Patrizia Rossi
# Jefferson Lab 
# 12000 Jefferson Avenue
# Suite 5
# Newport News VA 23606 (USA)
# e-mail: rossi at jlab.org
# phone: +1 (757) 269 7740
# fax: + 1 (757) 269 5800
# cell: +1 (757) 528 7606




> On 23/ago/2017, at 06:32, Dario Orecchini <Dario.Orecchini at lnf.infn.it> wrote:
> 
> Hello,
> 
> I and Sandro suggest to use the Yellow RAL 1016. It's a regular Yellow very similar to safety Yellow.
> Regarding the Bob comments the drawings update is on going, however go on with the procurements because
> we are speacking of not fundamental details.
> 
> Best regards
> Dario e Sandro
> 
> Il 2017-08-23 00:09 Amrit Yegneswaran ha scritto:
>> Bob,
>> Below are the cost changes as it pertains to colors.
>> 	* Given that the cost increase for painting the parts yellow is $708
>> more than having the parts painted in white - 50% the cost of the
>> strongback parts,
>> 	* and given the fact that we are in a terrible budget crunch, i'm
>> sure you know this fact, there isn't money available to endorse
>> painting the parts in yeloow.
>> _So the parts will be painted white_.
>> Thank you for your understanding
>> amrit
>> 		White (Current Quote)
>> White (Currently quoted)
>> Yellow (If Specified on drawings)
>> Safety Yellow (If Specified on drawings)
>> Load Test Parts
>> $1840
>> $2020
>> $2400
>> Trolley
>> $2375
>> $2550
>> $3000
>> Strongback parts
>> $1490
>> $1843
>> $2400
>> TOTAL COST
>> $5705
>> $ 6413
>> $7800
>> -------------------------
>> FROM: "Robert Miller" <rmiller at jlab.org>
>> TO: "Tyler Lemon" <tlemon at jlab.org>
>> CC: "dsg-rich" <dsg-rich at jlab.org>
>> SENT: Tuesday, August 22, 2017 3:34:40 PM
>> SUBJECT: Re: [Dsg-rich] RICH part drawings to check before fabrication
>> Hi Tyler,
>> You can paint all the parts regular yellow to reduce the cost.
>> Regards,
>> Bob
>> Sent from my iPhone
>> On Aug 22, 2017, at 1:59 PM, Tyler Lemon <tlemon at jlab.org> wrote:
>>> Hello Bob,
>>> In regards to General Comment #1 you made in the attached document,
>>> we were told by G&R Metals that safety yellow is more expensive
>>> compared to regular yellow because safety yellow is defined by ANSI
>>> Z535 standard.
>>> Marc has contacted G&R for an estimate on how much more the job will
>>> cost if safety yellow is used. The price difference is in the table
>>> below.
>>> White (Current Quote)
>>> White (Currently quoted)
>>> Yellow (If Specified on drawings)
>>> Safety Yellow (If Specified on drawings)
>>> Load Test Parts
>>> $1840
>>> $2020
>>> $2400
>>> Trolley
>>> $2375
>>> $2550
>>> $3000
>>> Strongback parts
>>> $1490
>>> $1843
>>> $2400
>>> Because of the price difference, could you let us know which parts,
>>> if any, can be painted with regular yellow or plain white?
>>> Best regards,
>>> Tyler
>>> -------------------------
>>> FROM: "Bob Miller" <rmiller at jlab.org>
>>> TO: "Dario Orecchini" <dario.orecchini at googlemail.com>, "Tomassini
>>> Sandro" <sandro.tomassini at lnf.infn.it>
>>> CC: "Tyler Lemon" <tlemon at jlab.org>
>>> SENT: Thursday, August 17, 2017 3:01:28 PM
>>> SUBJECT: Re: RICH part drawings to check before fabrication
>>> Hi Dario and Sandro,
>>> Please see my comments in the attached document for the RICH tooling
>>> drawings.
>>> Regards,
>>> Bob
>>> On 8/16/2017 3:58 PM, Tyler Lemon wrote:
>>>> Hello Bob,
>>>> As we discussed on the phone, attached are the three drawings sets
>>>> for the RICH parts that DSG would like checked by Hall B
>>>> Engineering.
>>>> It would be urgent to check these as soon as possible to avoid any
>>>> delay in the parts' fabrication. We expect that the procurement of
>>>> the fabrication contract will be complete in about one week.
>>>> Best regards,
>>>> Tyler
>>> --
>>> Bob Miller
>>> Hall B Lead Engineer
>>> Jefferson Lab
>>> 757 269-7867
>>> <RICH Drawing Review.docx>
>> _______________________________________________
>> Dsg-rich mailing list
>> Dsg-rich at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/dsg-rich
>> _______________________________________________
>> Dsg-rich mailing list
>> Dsg-rich at jlab.org
>> https://mailman.jlab.org/mailman/listinfo/dsg-rich
> _______________________________________________
> Dsg-rich mailing list
> Dsg-rich at jlab.org
> https://mailman.jlab.org/mailman/listinfo/dsg-rich

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170823/16f7b4dd/attachment-0002.html>