[Dsg-rich] Installation of support panels in RICH detector

[Ed Folts]

Hi Marc

It would probably be wise to fill out a B list just to cover the bases.

thanks

Ed


On 3/10/2017 3:36 PM, Marc McMullen wrote:
> Hi Ed,
>
> The tasks covered in TOSP are essentially complete, we will perform 
> two more lifts covered withing the scope of that TOSP.
>
> Next week INFN and the DSG will perform the installation of the 
> support panels for the electronics (Electronics to be installed at a 
> later date, under a new TOSP). These tasks are not covered in the 
> current TOSP, it is an intermediate task between the ones covered in 
> the current and the ones which will be covered in the installation of 
> electronics, mirrors, and PMTs.  The task involves using standard 
> tools to do the installation. We will use the enclosed platform stairs 
> to work on anything greater than normal standing height. There will be 
> no use of the gantry or winch to perform these tasks. So I am handling 
> this with an informal THA as per the work planning guidance, I 
> estimate the work to take much less than 2 weeks. We will still do the 
> standard pre-job briefings prior to the shift.
>
> Thanks,
>
>
>