[Dsg-rich] Question regarding using Loctite in EEL 124 cleanroom

[Tyler Lemon]

Hello Mike, 
Kevin Bailey, our contact for this task would be able to answer your questions regarding the procedure and work time where the Loctite will be used. He is included in this email. The nearest eyewash station is in the hallway near the restrooms in the EEL building. However, there is a sign that says the eyewash station is inoperable and to use the drench hose immediately next to it instead. We plan on using nitrile gloves and safety glasses. We will already have clothes covering on as the work will be taking place in the clean room. 

Kevin, 
Please see Mike's email below. Would you be able to answer any of the procedure questions? 

Best regards, 
Tyler 


From: "Michael Brown" <brownm at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Cc: "Jennifer Williams" <jennifer at jlab.org>, "dsg-rich" <dsg-rich at jlab.org> 
Sent: Thursday, May 11, 2017 8:15:07 AM 
Subject: Re: Question regarding using Loctite in EEL 124 cleanroom 

Tyler can you describe the process so we can better understand it. How is it to be applied? How long is the anticipated work time with the loctite? How many people will be using it? Is it going to be taken directly from the 5 gallon bucket? Where is the nearest eyewash? What is the planned personal protective equipment to be used? 

thanks 
Mike 

Michael Brown 
Jefferson Lab 
ESH&Q Industrial Hygienist 
12000 Jefferson Avenue 
Newport News, VA 23606 
brownm at jlab.org 
757-269-6380 

----- Original Message ----- 
From: "Tyler Lemon" <tlemon at jlab.org> 
To: "Jennifer Williams" <jennifer at jlab.org>, "Michael Brown" <brownm at jlab.org>, "dsg-rich" <dsg-rich at jlab.org> 
Sent: Wednesday, May 10, 2017 5:07:09 PM 
Subject: Question regarding using Loctite in EEL 124 cleanroom 

Hello Jennifer and Mike, 

We plan to use Loctite we received from collaborators on Monday May 15 for the assembly of the RICH detector. The work requiring Loctite will be done in the EEL 124 clean room. 

Since the clean room recirculates the air inside of it, are there any hazards we should be aware of or precautions we should take regarding outgassing of the Loctite? Please let us know. 

Attached is the SDS of the Loctite compound that we will use. 

Best regards, 
Tyler Lemon 
Detector Support Group 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170511/0e7392c0/attachment-0002.html>