[Dsg-rich] Schedule RICH stiffening tool load test

[Tyler Lemon]

Hello Mark, 

The plan to load test RICH's stiffening tool is to use the trolley formerly for transportation of Hall B's drift chambers to attach a test load to RICH's stiffening tool. In the attached PDF, page 1 shows a diagram of the stiffening tool on the trolley with a test load. 

I do not know where this load test can be performed or what item will be used as the test weight as up until October 3, Hall B Engineering was to perform the load test. 

Will we need to take the trolley and stiffening tool to a specific location for the load test? 

Best regards, 
Tyler 




From: "Mark Loewus" <loewus at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Sent: Wednesday, October 4, 2017 10:13:26 AM 
Subject: Re: Schedule RICH stiffening tool load test 

Tyler, 

I need to understand how you will conduct the load test. Please, give me a call so we can discuss. What is the SWL of the lifting device. 

Mark Loewus 
Manager of Crane Services 
Phone- 757-269-7847 
Cell- 757-871-3072 
Email- Loewus at jlab.org 

----- Original Message ----- 
From: "Tyler Lemon" <tlemon at jlab.org> 
To: "Mark Loewus" <loewus at jlab.org>, "dsg-rich" <dsg-rich at jlab.org> 
Sent: Tuesday, October 3, 2017 9:32:13 AM 
Subject: Schedule RICH stiffening tool load test 

Hello Mark, 

We need to schedule a load test for the RICH stiffening tool that will be used to lift Hall B's RICH onto its transportation trolley. 

Bob Miller has stated we should contact you for the load test. 

Could we schedule the stiffening tool's load test for the morning of October 11, 2017? 

Please let us know. 

Best regards, 
Tyler 


From: "Bob Miller" <rmiller at jlab.org> 
To: "Tyler Lemon" <tlemon at jlab.org> 
Cc: "Doug Tilles" <tilles at jlab.org> 
Sent: Monday, October 2, 2017 1:11:42 PM 
Subject: Re: Schedule RICH stiffening tool load test 



Please see Doug Tilles's email from last month. The load test should be done by Mark Loewus from Facilities. 

Regards, 

Bob 



On 9/29/2017 9:54 AM, Tyler Lemon wrote: 



Hello Bob, 

We should receive the required parts to be able to load test the RICH stiffening tool from G&R Metals by Friday October 6, 2017. 

Could we schedule the stiffening tool's load test for October 10, 2017? 

Please let us know when the load test can be scheduled. 

Best regards, 
Tyler 



-- 
Bob Miller 
Hall B Lead Engineer 
Jefferson Lab 
757 269-7867 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20171005/2425857f/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Stiffening Tool Load Test_All Pdf_082517.pdf
Type: application/pdf
Size: 4165276 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20171005/2425857f/attachment-0002.pdf>