[Dsg-rich] RICH patch panels received from Argonne

[Tomassini Sandro]

Nello Tyler,
Everything is fine...
Many thanks and have a nice weekend.
Sandro

⁣Inviato da BlueMail ​

Il giorno 8 set 2017 22:43, alle ore 22:43, Tyler Lemon <tlemon at jlab.org> ha scritto:
>Hello Sandro, 
>
>Attached are side views of both patch panels. 
>
>Also attached for reference is the same picture as this morning, but
>with the edge resting on the floor in the side view photo highlighted
>in red. 
>
>Best regards, 
>Tyler 
>
>
>From: "Tomassini Sandro" <sandro.tomassini at lnf.infn.it> 
>To: "Tyler Lemon" <tlemon at jlab.org> 
>Cc: "dsg-rich" <dsg-rich at jlab.org>, "Kevin Bailey"
><kevin_bailey at anl.gov>, "Tom O'Connor" <toconnor at anl.gov> 
>Sent: Friday, September 8, 2017 3:46:54 PM 
>Subject: Re: [Dsg-rich] RICH patch panels received from Argonne 
>
>Hi Tyler 
>Can you send a side photo of the patch panel support? 
>Many thanks 
>Sandro 
>
>Inviato da BlueMail 
>Il giorno 8 set 2017, alle ore 17:15, Tyler Lemon < tlemon at jlab.org >
>ha scritto: 
>
>
>Hello, 
>
>This morning, we received the two RICH patch panels from Argonne.
>Attached is a photo of both patch panels. 
>
>The panels will be stored in EEL 125. The hardware that was included
>(ten M10 x 45mm screws) will be placed in the DSG cabinet marked RICH
>in the EEL hallway. 
>
>Best regards, 
>Tyler 
>
>
>Dsg-rich mailing list 
>Dsg-rich at jlab.org 
>https://mailman.jlab.org/mailman/listinfo/dsg-rich 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170908/4b01f5b4/attachment-0002.html>