[Dsg-rich] Fwd: Stainless Steel Tubing Inquiry

[Marc McMullen]

Hi Matt,

I want to set up a flow rate test using 1/2" 316 steel pipe manifold 
(see attached drawing) on the  valve panel compressed air outlet. For 
the test we will use 40 - 60' of 1/2 nylon tube, and all Swagelok 
stainless steel fittings. The test is to determine the flow at 60psi. 
The relief is setup at 90psi. Is this ok.

Thanks,

Marc


On 9/28/2017 1:56 PM, Matthew Marchlik wrote:
> Marc,
>
> The PVC coated tube from McMaster is ASTM A269, its acceptable from a pressure system standpoint. Let me know what tubing you decide on.
> https://www.mcmaster.com/#3331k13/=19kz7gr
>
> Matt
>
> ----- Forwarded Message -----
> From: "nj sales" <nj.sales at mcmaster.com>
> To: "Matthew Marchlik" <marchlik at jlab.org>
> Sent: Thursday, September 28, 2017 1:49:28 PM
> Subject: RE: Stainless Steel Tubing Inquiry
>
> Hi Matt,
>
>
>
> The manufacturer states that the tubing is made from welded 316L stainless steel ASTM A269.
>
>
>
> Charlotte
>
>
>
>
> From: Matthew Marchlik <marchlik at jlab.org>
>
> Sent: Thursday, September 28, 2017 9:54 AM
>
> To: nj sales <nj.sales at mcmaster.com>
>
> Subject: Re: Stainless Steel Tubing Inquiry
>
>
>
>
> Hi,
>
>
>
> Does the manufacturer provide any ASTM specifications for the stainless steel tubing?
>
>
>
> Matt
>
>
>
> ----- Original Message -----
>
> From: "nj sales"
>
> To: "Matthew Marchlik"
>
> Sent: Thursday, September 28, 2017 10:51:19 AM
>
> Subject: Stainless Steel Tubing Inquiry
>
>
>
> Hi Matt,
>
>
>
>
>
>
>
> I attached the available specifications sheet and drawing of this stainless steel tubing with plastic exterior ( 3331K13 ). We consider the manufacturer information proprietary. Let me know which additional information you need and I will look into this further.
>
>
>
>
>
>
>
> Charlotte
>
>
>
>
>
>
>
>
>
> From: marchlik at jlab.org
>
>
>
> Sent: Thursday, September 28, 2017 9:33 AM
>
>
>
>
>
> Message
>
> Hi, I would like to have more detailed information on the material specs for tubing 3331K13. Who is the manufacturer? Thanks
>
> From
>
> Matt Marchlik ( marchlik at jlab.org )
>
> JLAB

-- 
Marc McMullen
Detector Support Group
757-269-7738

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Pipe for manifold_Drawing.pdf
Type: application/pdf
Size: 305776 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-hallb_rich/attachments/20170929/8e150f41/attachment-0002.pdf>