[Dsg-rich] [New Logentry] Easidew moisture transducer installed on RICH N2 exhaust

[tlemon at jlab.org]

Logentry Text:
--
This afternoon, an Easidew moisture transducer was installed in line on one of RICH's nitrogen exhaust lines. This sensor will measure the water volume in the RICH N2 volume in parts-per-million (transducer range 0-3000 ppm).

The fittings and transducer were installed on the exhaust closest to the floor near RICH's patch panel. The transducer was strain-relieved by zip tying the fitting at the patch panel.

A cable was run from the transducer up to the N2 cRIO on Forward Carriage Level 3, Rack C3-4.

The moisture transducer is wired to the cRIO. Wiring of the transducer and modifications to the cRIO program to readout the transducer are scheduled for the morning of July 31, 2018.

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3583057
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20180730/2b8f13cb/attachment.html>