[Dsg-rich] [New Logentry] Follow-up Re: RICH air-cooling regulator setting reduced for test

[tlemon at jlab.org]

Logentry Text:
--
After letting the RICH air-cooling system run with the pressure regulator set to ~35 psi, we were not able observe any differences in flow. Airflow 1 and Airflow 2 appear to behave the same way, following the on-off cycle of the compressor.

Attached is a Mya Viewer plot of Airflow 1 and Airflow 2. The drop in signal at ~11:30AM was when the regulator was changed to 35 psi and the rotameters readjusted to flow ~500 slm for Airflow 1 and ~400 slm for Airflow 2.

At this time, we will go turn off the compressor as requested by INFN collaborators.

---

This is a plain text email for clients that cannot display HTML.  The full logentry can be found online at https://logbooks.jlab.org/entry/3574255
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20180509/8d7678db/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: RICH airflow after regulator adjustment 2018-05-09.JPG
Type: image/jpeg
Size: 94547 bytes
Desc: not available
URL: <https://mailman.jlab.org/pipermail/dsg-rich/attachments/20180509/8d7678db/attachment-0001.jpe>