[Eg6_analysis] Calibration cooking

[Lamiaa El Fassi]

Hi Mohammad,

Upon your request, I have processed the full list of 1.2 GeV 4He runs (117
runs).
The HROOT outputs are saved in the following directory:
/volatile/clas/claseg6/gempass1_v1/1p2gev/HROOT/.

As for your request to process 400K events for the other beam energies, I
processed
the first two bosfiles (*.A00 & *.A01) for 5.7 GeV runs since the 1st
boshas less than
the events requested. These HROOT files are saved in this directory:
/volatile/clas/claseg6/gempass1_v1/5p7gev/HROOT/.

I am currently processing the same two files of 6 GeV runs even if the 1st
bos has more
than 400K events. In case there is an issue with the 1st bos you may use
the second one.
I will let you know when the cooking of 6 GeV dataset is done.

Regards,

Lamiaa




On Thu, Jul 11, 2013 at 2:37 PM, Mohammad Hattawy <
mohammad.hattawy at gmail.com> wrote:

> Hello all,
>    So, we all agree that HROOT output files will be enough, and we do not
> need BOS files.
> Lamiaa, you can go with the cooking if this is fine.
>
> Regards,
> Mohammad.
>
>
> On Thu, Jul 11, 2013 at 3:09 PM, Nathan Baltzell <baltzell at anl.gov> wrote:
>
>> **
>> Hello Mohammad,
>>
>> HROOT with TPCC will have all raw info about all hits in all reconstructed
>> tracks.  Lamiaa's tcl that was attached does have the "ltpcc_nt_do" flag,
>> which will turn on the TPCC variables in the ntuple.
>>
>> -nathan
>>
>>
>>
>> On Thu, 11 Jul 2013 02:58:48 -0500, Mohammad Hattawy <
>> mohammad.hattawy at gmail.com> wrote:
>>
>> Hello Lamiaa,
>>
>>    For the run lists, we need all the 1.2 GeV runs with 4He target, and
>> the first file of each run of 5.7 GeV and 6 GeV. If it is easier for you to
>> pick a fixed number of statistics from each run, I would say we need the
>> first 400 000 events from all the 6  and 5.7 GeV.
>>   Regarding the output files, I would say that HROOT is enough. Nathan,
>> do we need BOS files also?
>>   For the tcl file, i think it is fine.
>>
>> Best regards,
>> Mohammad.
>>
>>
>> On Wed, Jul 10, 2013 at 3:52 PM, Lamiaa El Fassi <lamiomar at gmail.com>wrote:
>>
>>> Hi Raphael,
>>>
>>> In case the information that you need is included in the TPCC bank, as
>>> Nathan mentioned,
>>> I may need to process few runs for you since the TPCC, which is a
>>> calibration bank, was not
>>> turned on in the pass1v1 production pass. For this task I am suggesting
>>> the following:
>>>
>>> 1. Could you check different beam energy run lists posted in the cooking
>>> link (here<https://clasweb.jlab.org/rungroups/lowq/wiki/index.php/Cooking_Notes>)
>>> and pick
>>> the runs that you want me to process? Please specify also how much
>>> statistics you may need
>>> for each run!
>>> 2. Could you specify also the type of output files that you need; BOS or
>>> HROOT files or both?
>>> In this case I will save the output files only on Volatile disk not on
>>> Silo.
>>> 3. Could you check the attached tcl file which I am usually using for
>>> the RTPC calibration to see
>>> if all what you need for this RTPC calibration check is included?
>>>
>>> Best regards,
>>>
>>> Lamiaa
>>>
>>>
>>> On Tue, Jul 9, 2013 at 5:02 PM, Nathan Baltzell <baltzell at anl.gov>wrote:
>>>
>>>> Hi Raphaël,
>>>>
>>>> Yes, I think the TPCC bank should be sufficient.  It has TDCs, raw ADCs,
>>>> and also gain-calibrated ADCs for every hit used in the GCPB bank, which
>>>> has some very loose cuts to remove junk tracks.  Each TPCC hit has a
>>>> pointer to the GCPB track it was associated with.  That raw information
>>>> cannot be gotten from only cooked pass1v1 data.
>>>>
>>>> Regards,
>>>> Nathan
>>>>
>>>>
>>>>
>>>> On Tue, 09 Jul 2013 09:57:52 -0500, Dupré Raphaël <
>>>> raphael.dupre at gmail.com> wrote:
>>>>
>>>>  Dear Lamiaa and Nathan,
>>>>>
>>>>> We are starting to work again on the RTPC calibration. One of the
>>>>> points that we would like to check is that the calibration is not
>>>>> changing during the run.
>>>>>
>>>>> We would need the detailed tpc bank which includes (raw adc, tdc, ...)
>>>>> for all the 1.2 GeV runs, and the first file of all the 5.7 and 6 GeV
>>>>> runs.
>>>>>
>>>>> My first question to Nathan, does the TPCC bank information is good
>>>>> for this and does it provides raw ADC? (raw ADC are for other tests
>>>>> later, but we will eventually need them too) Else, what should we use?
>>>>>
>>>>> Then could Lamiaa cook the runs mentionned above? or maybe they can be
>>>>> extracted from BOS files from the pass1v1 cooking?
>>>>>
>>>>> Best regards,
>>>>>
>>>>>
>>>>> --
>>>>> Raphaël Dupré
>>>>>
>>>>
>>>
>>
>>
>> --
>> Best regards,
>> Mohammad Hattawy.
>>
>>
>>
>>
>>
>
>
> --
> Best regards,
> Mohammad Hattawy.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://mailman.jlab.org/pipermail/eg6_analysis/attachments/20130714/6f590782/attachment.html